WOCA Oil Refreshing Soap is a mild maintenance agent for the cleaning
and maintenance of oiled and waxed wood floors. It combines optimum
cleaning with a simultaneous re-application of oil.
— Ensures maximum dirt and waterresistance from day one
— Enhances the natural colour to the wood
— Cleans and maintains the floorgently
— Leaves a mat protecting oil film on the wood surface
— For regularly cleaning
— Certified by IBR

Canister sizes: 0.25L - 1L - 2.5L

Coverage: 150-200 m2/L

Base: Water based

VOC: Free

Colour options: Natural 

Application area WOCA Oil Refresher is a mild maintenance agent for the cleaning and maintenance of oiled and waxed wood fl oors. Oil Refresher Natural is used for naturally oiled wood fl oors or for wood fl oors oiled with Colour Oil, whereas WOCA Oil Refresher White is expecially suitable for white oiled wood fl oors. WOCA Oil Refresher combines optimum cleaning with a simultaneous re-application of oil. The oil component provides the surface of the wood with an additional mat protective fi lm. The maintenance with Oil Refresher may also be carried out only partially.

Result Using WOCA Oil Refresher helps the wood preserve its glow and natural colours even after multiple application, because the oil penetrates the wood and simultaneously generates a new protective mat oil fi lm on the surface. Using a traditional fl oor soap could give the fl oor a slightly desiccated appearance, because the soap inevitably absorbes the oil.

Application

Use a mop or a cotton cloth.

After care

Not required.

Maintenance and cleaning

Oiled wood floors may be regularly treated with WOCA Natural Soap Natural or White and with WOCA Maintenance Oil or Paste – depending on the exposure once in a year in residential areas and more often in the case of wood fl oors in commercial areas which are more exposed to hard-wear. WOCA Oil Refresher does not replace the original treatment with maintenance oil, but it helps reducing the number of oil treatments.

Tools 2 plastic buckets, mop, doodlebug, fl oor cloth or the like. Clean tools with water and soap.

Please notice! Oil Refresher may not be used on lacquered surfaces!

Oil Refresher is used for regular cleaning and maintenance of oiled wood fl oors. Oil Refresher, Natural is typically used for natural oiled and colour oiled fl oors and Oil Refresher, White for white oiled wood fl oors. Oil Refresher combines effi cient cleaning with re-oiling as addition oil is penetrating into the wood of the fl oor forming a mat protective layer in the surface.

1 Shake the bottle well before use.

The floor must be free from dust before treatment.

3 Mix Oil Refresher with lukewarm water: – For traditionally oiled fl oors: 1:20 (250 ml Oil Refresher into 5 litres of water). – For UV-oiled and oil-waxed fl oors: 1:40 (125 ml Oil Refresher into 5 litres of water). The mixture ratio can vary depending on wear and requirement.

4 Treat with a light wrung fl oor cloth or mop lengthwise of the floor. Immediately afterwards, dip fl oor cloth or mob into mixture and wipe the fl oor with hard wrung fl oor cloth or mop again lengthwise of the wood. Use two buckets - one with Oil Refresher mixed with water and one with rinsing water. It is recommended to clean an area of approx. 10 m2 at the time. By doing it this way, the fl oor is exposed to moisture for a short period.

5 Leave the fl oor to dry for approx. two hours before use.

6 If a light shine is wanted, polish the dry floor with a white pad.

Note: Oiled wood floors can also be cleaned regularly with Natural Soap ‘Natural’ or ‘White’ and re-oiled with Maintenance Oil or Maintenance Paste at regular intervals in residential areas and more often in commercial areas. On surfaces exposed to extremely hard wear, the treatment can be only partially.